2021
- High performance and machining reliability due to new chip breaker geometry
- Reduction in cutting forces
- Universal use due to the customized cutting edge geometry
Download
- Material-saving cutting due to milling widths from 0.25 mm
- Milling depths up to 13.5 mm
- High performance because of up to 12 effective teeth
Download
- Cost saving due to exchangeable insert
- Different sizes available from stock
- Thread milling in partial and full profile
Download
- High cutting performance in superalloys and powder metallurgical steels
- Wide range of tools for hard machining
- Perfectly adapted geometries for a wide range of applications
Download
- Simple set-up and exchanging of the reaming head without tool adjustment
- Modular system design with a wide range of standard inserts
- Inexpensive servicing of the reaming heads by HORN
Download
- High precision and surface finish
- Increased efficiency due to perfectly matched design
- Increased tool life due to high-performance PCD
Download
- Quiet operation due to matched helix angle and tooth pitch
- High metal removal rates due to special HPC geometry
- Optimized geometry for circular ramp milling
Download
- Hard machining up to 58 HRC with coated carbide
- Efficient machining of difficult-to-machine materials
- Fast delivery times due to in-house coating
Download
- Increased productivity thanks to heat-resistant grade
- Efficient machining of stainless steel.
- Fast delivery time due to in-house coating process
Download
2020
- Product extension for drilling into solid materials
- Workpiece tolerances of ± 0.02mm can be achieved
- Use with the main material groups P, M, N, K
Download
- High surface quality through precision ground geometry
- Multi-System geometry for internal and external machining
- Universally suitable for different groove widths and materials
Download
- Process stability through chip breaking in difficult-to-cut materials
- Optimum chip control with pitches from 0.5 to 2.5 mm and diameter from 8 mm.
- Available in the standard program System Mini 108, 111, 114 und 116
Download
- Geometry for grooving and parting off with high feed rates
- Safe chip removal and optimal chip control
- Stable cutting edge
Download
- Higher performance through targeted internal cooling
- Larger cutting diameter for increased flexibility
- New cutting widths, grades and geometries
Download
- Economical machining of sintered carbides
- Drilling into solid up to 10 x diameter and core drilling of threads
- Avoids the need for long eroding processes
Download
- Offer preparation within 48 hours.
- Creation of the approval drawing within 48 hours.
- Delivery time for toolholders and inserts within 5 working days following the approval of the drawing.
Download
- Unique solution for real-time tool monitoring of micro-turning operations.
- Information about the condition of the tool during machining.
- Piezo sensor measures even the lowest cutting forces with high resolution.
Download
- Precision ground indexable inserts with eight usable cutting edges
- A soft cut through positive geometry
- High metal removal rate due to high cutting values
Download
- Gear Milling
- Gear Broaching
- Gear Skiving
- Gear Shaping
- Single-Point Gear Milling
- Bevel Gear Milling
- 5-Axis Milling of Gear Teeth
- Deburring of gears
Download
- New programme for square broaching
- Supplementary dimensions for broaching inserts for conventional broaching and broaching units
- New toolholder for conventional broaching and broaching units
Download
- High cutting edge stability
- Soft cutting geometry
- Low vibration tendency
Download
- Universal basic holder with interface „T“ for different grooving cassettes
- Very stable and repeatable interface
- Highest performance through targeted coolant supply to the cutting edge
Download
- High polish machining of non-ferrous metal and synthetics
- Spindle protection due to low mass aluminum body
- For universal use
Download
